Kit Stator + Pickup Suzuki RM125 / RM250 ’94-’01 (RM22843)

• You must re-install your original connector and grommet (see picture)
• Once your connector and grommet is re-installed, our part becomes a plug-and-play unit, direct fit, and very easy to install
• Pickup pulsar coil included (separate)
• Higher grade of electric components
• Highest grade of copper winding, resistant to 200 degrees Celsius
• All shipped products are tested

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Dimensions Stator:

Physical Dimensions:

• Interior diameter: 28mm
• Exterior diameter: 57mm
• Thickness: 15mm
• Length of wires stator to terminals: 600mm

Other specifications:

• Number of wires: 4
• Number of plugs: 0
• Number of terminals: 4

Wire to wire resistance:

• Source 1 : Red to White = 28 ohms +/-20%
• Source 2 : Yellow to Yellow = 0.4 ohms +/- 20%

Dimensions Pickup Pulsar Coil:

Physical Dimensions:

• Height: 25mm
• Length: 22mm
• Width: 18mm
• Bracket centre to centre: 35mm
• Wires length: 90mm

Other Specifications:

• Number of wires: 2
• Number of pins: 2

Wire-to-Wire Resistance:

• Pink/Red to White = 100 ohms +/- 20%